One of the main qualities of a good house is its floor, so it is very important that it is strong, does not squeak, does not collapse, and is comfortable. Your attention is presented floor from multi-layer plywood for the apartment in Barcelona, which is very popular.
Today there is a wide choice of floors and their coverings, so we will consider one of them in detail. First, pay attention to the humidity and sound insulation in your apartment. These are very important factors for your comfort and safety. The floor from multi-layer plywood in the apartment in Barcelona will help to equip a reliable support, which will keep the heat, at the same time providing silence and peace.
To start the work, you will need - tile glue, sheets of multi-layer plywood, lacquer, sealant, bars 50x100 mm, as well as a thin antiseptic material. We start standardly - completely demolish the old floor, remove, carefully sweeping all the garbage. The already prepared surface needs to be leveled with cement mortar. The bars treated with liquid antiseptic, evenly set with a level.
The distance between the bars should be kept exactly proportional to the size of the plywood sheets. After finishing the work on laying the bars, you need to wait for the complete drying of the cement mortar. Then the free space between the bars is filled with tile glue. By the way, the instruction for using the glue is placed on the package. The glue should fill all the free space up to the upper edge of the bars.
When the glue dries completely, the floor is impregnated with an antiseptic. The antiseptic material is applied along and across, without forgetting to give an overlap on the walls 10-15 millimeters. To make the floor from multi-layer plywood in the apartment in Barcelona strong, the plywood is fastened to the bars with screws.
The gap between the sheets should be 2-3 mm. After finishing the laying of this gap, it is filled with a sealant, we try to carefully level the seams.
Now the easiest and the best part - the completion of the floor according to your own fantasy and taste. It is recommended to cover with lacquer at first, and then you can decorate with any decor, for example, a carpet. If the lacquer floor is your final result, it is recommended to pre-impregnate the sheets of plywood with a varnish, and then process with a lacquer. Such a floor will last very long, will look stylish and beautiful.
