When carrying out repair works in bathrooms, corridors, installers of the city of Barcelona use self-adhesive decorative film, which consists of polyvinyl chloride (PVD), due to the property of water permeability of the surface.
The wall covered with such a film is able to keep its novelty for a long time.
Preparation for repair for the installation of the film PVD at the repair of an apartment in Barcelona
In order to get a guaranteed result, it is necessary to carefully prepare for the repair. First, you need to take care of the wall on which the film will be pasted, removing the old wallpaper, dirt and paint. The surface is brought to order, all existing defects and roughness are leveled. The builders of Barcelona fill the wall with putty, and then apply a layer of oil paint, if the wall is too rough, then the surface is leveled and the plaster is applied again.
After dealing with irregularities, the work on de-oiling the leveled wall begins. The process is simple. Warm water is taken, in which cleaning agents are dissolved and the surface is washed. When there are enough spots, then an alkaline solution is used, which is able to effectively remove all fat stains.
Before starting to paste, the surfaces are allowed to dry. The builders of Barcelona use a plumb bob (a weight with a string) when pasting, which aligns the strips of the film. It remains to remove the protective layer located on the back, approximately one meter. Start pasting evenly, following the vertical fixed with the plumb bob. The strips are leveled with a soft cloth or sponge. The strips are laid over each other by 1-2 cm wide. The joints are strongly pressed and leveled. Professionals at pasting the film PVD in Barcelona adjust the strips of the film towards the windows, which makes the seams practically invisible.
